ENS-24XA High Frequency Noise Simulator ( is a generator used to evaluate immunity performance of electronic
equipment when subjected to transients interference such as originated from switching of large inductive loads.
It may also be applied to test the performance of electronic system, the immunity to radiation of local loops and
grounding system.
Parameters:
Impulse width: Square impulse 50ns~1000ns (50ns/step)
Output impulse voltage: 0~200V, 0~2000V(Two ranges)
Inner impedance of generator: 50Ω
Pulse polarity: Positive or negative
Rise time: 1ns(50Ω)
Operation mode: Manual Single
External trig: TTL Level(MAX)
Internal trig Adjustable
Synchronous trig versus power frequency: 50 or 60Hz
Impulse injection phase angle: 0~360
Capacity of power supply: AC 220VM, 10A max, DC 10A max
Dimensions (D*W*H) mm: 400*430*250 mm
Weight: About. 20kg
Accessory:
1, Three-core EUT power cable (Tyep: 24xa-001)
2, Pulse width modulation cable (Type: 24xa-002)
3, Impulse injection cable (Type: 24xa-003)
4, Radiating probe (Type: 24xa-004)
m.13510100387.b2b168.com
